Maximum pump service life for Gather Mag Drive Pumps requires following some basic important rules:
- Intake: The maximum amount of fluid to be conveyed by the pump should flow into the pump freely and without obstructions.
- The differential pressure the pump must overcome should be as high as necessary but as low as possible!
The pump should not be oversized in terms of capacity. It should be flexible to handle the required flow or volume. For this reason, Gather recommends using speed-variable drives.
Application in High-Temperature or Sterile Areas (SIP)
GATHER gear pumps can be cleaned in place, i. e. have CIP capability. Supplementing the unit with a steam bypass enables the pump to be sterilized in place (SIP capability). Thus, the pump pump is ideal for CIP or SIP applications.
Media and GATHER’s magnetic drive gear pump
Some fluids commonly pumped with Gather mag drive units are included below. If you are interested in a specific medium not listed below, contact or technical consultation team for assistance. We enjoy solving new challenges and applications.
|Ammonia||Fatty acid||Glues (adhesives)||Nitric acid|
|Ammonia liquor||Hydrofluoric acid||Solvents||Salt solutions|
|Formic acid||Formaldehyde||Methanol||Hydrochloric acid|
|Benzene||Glycol||Methyl chloride||Sulfuric acid|
|Hydrogen cyanide||Urea||Nutrient solution||Silicone oil|
|Chloroform||Resins||Sodium chloride||Stearic acid|
|Chromic acid||Hop concentrate (Tetrahop)||Caustic soda solution||Trichloroethylene|
|Eisen (II) chloride||Isocyanate||Paraffin||Distilled water|
|Eisen (III) chloride||Refrigerants (Frigene)||Phosgene||Fully demineralized water|
|Acetic acid||Caustic potash solution||Phosphoric acid||Hydrogen peroxide|
|Ethylbenzene||Hydrocarbons||Protein solution||Citric Acid|
For more information about the full line of Gather pumps, please email Kim at firstname.lastname@example.org